跳转至

疑似房颤分析

最后更新:2023年08月31日

接口能力

本接口可识别心电数据中的疑似心房颤动,统计其发生次数及时间区间,适用于静态或日常活动中采集的数据。

警告

本接口分析结果仅供参考,请勿用于医疗诊断用途!

注意

  1. 本接口要求心电数据的时长至少达到30秒,若心电数据时长不足30秒将无法正常分析;
  2. 剧烈运动时采集的数据会增加误判的可能性。

请求方法

HTTP方法: POST
请求URL:http://api.amsu-new.com/amsu-analysis/v2/arrhythmia/af/results/
数据提交方式:multipart/form-data

Header参数:

字段 类型 描述
Authorization Bearer Token 构造方式为Bearer+(空格)+(Access Token)

Body参数:

字段 类型 必传 范围 描述
height Integer 90 - 240 身高,单位:cm
weight Float 30.0 - 200.9 体重,单位:kg
age Integer 18 - 120 年龄
gender Integer 0 - 1 性别,男10
ecg_file File *.ecg 二进制心电文件,以.ecg作后缀名,尺寸限制 100M 以内(约55小时离线数据)。数据将按照 小端序 2字节short型被解析,可使用 心电图查看工具 观察您的文件是否能正确解析
model String online、offline 心电记录模式,通过蓝牙采集的心电数据为online,在AMSU设备中存储的心电数据为offline
device String V6、S1 心电设备类型,对应蓝牙协议中「Device Information」-「Model Number」里包含的开发代号,心电衣(带)主机对应代号为V6,心电贴对应代号为S1

提示

若 model 为 online ,请在构造心电文件时用您自定义的信息(或任意值)填充前256个字节作为头部,若不构造头部,则文件中前1~2秒的心电数据不会参与分析。

返回参数

字段 类型 描述
id Integer 本次分析的标识
af Integer 疑似房颤发生次数
af_interval_list Double Nested Array of Integer 疑似房颤发生时间(秒)区间列表,如 [2,75],[400,450] 表示两次疑似房颤分别发生在 2 - 75 秒及 400 - 450 秒区间内

正确返回示例:

HTTP状态码:200

{
    "id": 7562,
    "af": 3,
    "af_interval_list": [
        [2,75],
        [400,450],
        [450,496]
    ]
}
错误返回示例:

HTTP状态码不为200

{
    "error": {
        "code": "ECG.TOO_SHORT",
        "msg": "The duration of ECG data needs to be longer than 30 seconds."
    }
}

错误码

HTTP状态码 错误码 说明
422 ECG.TOO_SHORT 心电数据长度不足30秒
422 ECG.INVALID_DATA 无法从心电数据中有效识别出R波,此错误的可能原因有:1. 心电文件格式出错;2.心电数据未正常采集;3.心电数据质量过差

另请参见 公共错误码

示例代码

OkHttpClient client = new OkHttpClient().newBuilder().build();
MediaType mediaType = MediaType.parse("text/plain");
RequestBody body = new MultipartBody.Builder().setType(MultipartBody.FORM)
  .addFormDataPart("height","188")
  .addFormDataPart("weight","88.8")
  .addFormDataPart("gender","0")
  .addFormDataPart("age","18")
  .addFormDataPart("ecg_file","example_online.ecg",
    RequestBody.create(MediaType.parse("application/octet-stream"),
    new File("/datas/example_online.ecg")))
  .addFormDataPart("model","online")
  .addFormDataPart("device","V6")
  .build();
Request request = new Request.Builder()
  .url("http://api.amsu-new.com/amsu-analysis/v2/arrhythmia/af/results/")
  .method("POST", body)
  .addHeader("Authorization", "Bearer eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJzdWIiOiJhcHBfa2V5OjkzZWUyMGNiNTliOTY0OWY3YzIwIiwiZXhwIjoxNjQ4Njk5MjA2fQ.WljGB-66JR9CFNYzaXjR81i0ySNmXfVAsqVW_lfLT7g")
  .build();
Response response = client.newCall(request).execute();
#import <Foundation/Foundation.h>

dispatch_semaphore_t sema = dispatch_semaphore_create(0);

NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:@"http://api.amsu-new.com/amsu-analysis/v2/arrhythmia/af/results/"]
  cachePolicy:NSURLRequestUseProtocolCachePolicy
  timeoutInterval:10.0];
NSDictionary *headers = @{
  @"Authorization": @"Bearer eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJzdWIiOiJhcHBfa2V5OjkzZWUyMGNiNTliOTY0OWY3YzIwIiwiZXhwIjoxNjQ4Njk5MjA2fQ.WljGB-66JR9CFNYzaXjR81i0ySNmXfVAsqVW_lfLT7g"
};

[request setAllHTTPHeaderFields:headers];
NSArray *parameters = @[
  @{ @"name": @"height", @"value": @"188" }, 
  @{ @"name": @"weight", @"value": @"88.8" }, 
  @{ @"name": @"gender", @"value": @"0" }, 
  @{ @"name": @"age", @"value": @"18" }, 
  @{ @"name": @"ecg_file", @"fileName": @"/datas/example_online.ecg" }, 
  @{ @"name": @"model", @"value": @"online" }, 
  @{ @"name": @"device", @"value": @"V6" } 
];

NSString *boundary = @"----WebKitFormBoundary7MA4YWxkTrZu0gW";
NSError *error;
NSMutableString *body = [NSMutableString string];

for (NSDictionary *param in parameters) {
  [body appendFormat:@"--%@\r\n", boundary];
  if (param[@"fileName"]) {
    [body appendFormat:@"Content-Disposition:form-data; name=\"%@\"; filename=\"%@\"\r\n", param[@"name"], param[@"fileName"]];
    [body appendFormat:@"Content-Type: %@\r\n\r\n", param[@"contentType"]];
    [body appendFormat:@"%@", [NSString stringWithContentsOfFile:param[@"fileName"] encoding:NSUTF8StringEncoding error:&error]];
    if (error) {
      NSLog(@"%@", error);
    }
  } else {
    [body appendFormat:@"Content-Disposition:form-data; name=\"%@\"\r\n\r\n", param[@"name"]];
    [body appendFormat:@"%@", param[@"value"]];
  }
}
[body appendFormat:@"\r\n--%@--\r\n", boundary];
NSData *postData = [body dataUsingEncoding:NSUTF8StringEncoding];
[request setHTTPBody:postData];

[request setHTTPMethod:@"POST"];

NSURLSession *session = [NSURLSession sharedSession];
NSURLSessionDataTask *dataTask = [session dataTaskWithRequest:request
completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
  if (error) {
    NSLog(@"%@", error);
    dispatch_semaphore_signal(sema);
  } else {
    NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response;
    NSError *parseError = nil;
    NSDictionary *responseDictionary = [NSJSONSerialization JSONObjectWithData:data options:0 error:&parseError];
    NSLog(@"%@",responseDictionary);
    dispatch_semaphore_signal(sema);
  }
}];
[dataTask resume];
dispatch_semaphore_wait(sema, DISPATCH_TIME_FOREVER);
var myHeaders = new Headers();
myHeaders.append("Authorization", "Bearer eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJzdWIiOiJhcHBfa2V5OjkzZWUyMGNiNTliOTY0OWY3YzIwIiwiZXhwIjoxNjQ4Njk5MjA2fQ.WljGB-66JR9CFNYzaXjR81i0ySNmXfVAsqVW_lfLT7g");

var formdata = new FormData();
formdata.append("height", "188");
formdata.append("weight", "88.8");
formdata.append("gender", "0");
formdata.append("age", "18");
formdata.append("ecg_file", fileInput.files[0], "example_online.ecg");
formdata.append("model", "online");
formdata.append("device", "V6");

var requestOptions = {
  method: 'POST',
  headers: myHeaders,
  body: formdata,
  redirect: 'follow'
};

fetch("http://api.amsu-new.com/amsu-analysis/v2/arrhythmia/af/results/", requestOptions)
  .then(response => response.text())
  .then(result => console.log(result))
  .catch(error => console.log('error', error));
import requests

url = "http://api.amsu-new.com/amsu-analysis/v2/arrhythmia/af/results/"

payload={'height': '188',
'weight': '88.8',
'gender': '0',
'age': '18',
'model': 'online',
'device': 'V6'}

files=[
  ('ecg_file',('example_online.ecg',open('/datas/example_online.ecg','rb'),'application/octet-stream'))
]
headers = {
  'Authorization': 'Bearer eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJzdWIiOiJhcHBfa2V5OjkzZWUyMGNiNTliOTY0OWY3YzIwIiwiZXhwIjoxNjQ4Njk5MjA2fQ.WljGB-66JR9CFNYzaXjR81i0ySNmXfVAsqVW_lfLT7g'
}

response = requests.request("POST", url, headers=headers, data=payload, files=files)

print(response.text)